Baoding AoCheng Machinery Co., Ltd
Home > News

Do You Understand The Basics Of Investment Casting?

Oct. 20, 2018

Investment Casting, also referred to as lost-wax casting, makes components from molten alloy, typically stainless steel alloys, brass, aluminum, and carbon steel. The very first step in the method is to construct a wax version of the end item. This can be achieved in one of 3 ways:

1. Form a gelatin mould around a good, 3D version of the last item.

2. Produce a metallic mould of the last solution, then fill it with warm wax.

3. Split and machine a replica of this item from wax.

Investment Casting Manufacturer tell you to throw several parts at the same time, a number of wax patterns could be constructed to a shrub using wax runners and sprues carefully linking them. The"tree" is subsequently dipped into a ceramic slurry that hardens as it dries. After getting several layers of ceramic which are permitted to harden, the shrub and its patterns are heated to remove the wax. The wax from the sprues and gates also flows from the shrub and forms tubes and pipelines for molten alloy to follow and totally fill the mould. 

Molten metal is poured to the now-empty mould and left to solidify. The ceramic mould, the investment, has been ruined to take out the area (s). 

If you also learn the information of other Precision Casting, you can call us at any time.

Investment Casting

Previous: Difference Between Sand Casting And Die Casting

Next: What Is Sand Casting?


Air Compressor Parts Casting

Air Compressor Parts Casti...

Sand Casting Company, Pump Housing

Sand Casting Company, Pump...

Iron Sand Casting, Coupling

Iron Sand Casting, Couplin...

OEM Casting Foudry Casting Parts, Gearboxes Housing

OEM Casting Foudry Casti...

Lug Valve Body Investment Casting Supplier

Lug Valve Body Investment ...

Copyright © Baoding AoCheng Machinery Co., Ltd. All Rights Reserved   

Home/About Us/Products/Contact Us/Sitemap